Conducted by Dr. Hasan GUNES
PhD Theses
-
Subaşı, Abdussamet " Numerical and experimental investigation of boundary layer transition with active and passive flow control methods", ITU Institute of Science and Technology, 2017.
-
Çadırcı, Sertaç " Development and Testing of a Jet and Vortex Actuator (JaVA) for Active Flow Control", ITU Institute of Science and Technology, 2010.
MSc Theses
-
Ak, S. Emre “Aerodynamic optimization of wiper system for high speed vehicles”, ITU Institute of Science and Technology, 2015.
-
Uzun, Yasam “Experimental investigation of thermodynamic losses of the variable capacity compressor at various rotational speeds”, ITU Institute of Science and Technology, 2015.
-
Demir, Ufuk “Numerical investigation of pressure drop, shear stress and particle focusing in microchannels”, ITU Institute of Science and Technology, 2015.
-
Otunç, Haşim “Hermetik kompresörlerde kullanılan elektrik motorlarının kompresör içi ısı geçişi açısından deneysel ve analitik olarak incelenmesi, İTÜ Fen Bilimleri Enstitüsü, 2015.
-
Tok, Furkan Ahmet “Değişken Kapasiteli Hermetik Kompresörlerde Termodinamik ve Mekanik Verimin İyileştirilmesi”, İTÜ Fen Bilimleri Enstitüsü, 2015.
-
Tas, Sibel “Experimental investigation of lubrications system in a hermetic reciprocating compressor” ITU Institute of Science and Technology, 2014.
-
Yildiz, Murat “FD analysis of an air conditioning system based on free cooling”, ITU Institute of Science and Technology, 2015.
-
Ozsipahi, Mustafa " Numerical investigation of oil flow rate in a hermetic reciprocating compressor", ITU Institute of Science and Technology, 2013.
-
Coskun, Umut Can “Numerical investigation of suction muffler in a hermetic reciprocating compressor”, ITU Institute of Science and Technology, 2013.
-
Dincer, Mehmet Onur “Numerical conjugated heat transfer analysis of a hermetic reciprocating compressor” ITU Institute of Science and Technology, 2013.
-
Selenbas, Bugra "Aerodynamics analysis of heavy vehicles: improvements in air deflector design", ITU Institute of Science and Technology, 2011.
-
Sevgi, Yakup “Experimental and numerical investigation on effect of inducer to centrifugal pumps cavitational behaviour", ITU Institute of Science and Technology, 2011.
-
Akguc, Alpay "Optimization of computational fluid dynamics problems using Kriging and POD methods", ITU Institute of Science and Technology, 2010.
-
Kiziltan, Gorkem "Flash steam heat recovery system", ITU Institute of Science and Technology, 2008.
-
Matkap, Unsal “Design and optimisation of an inline (duct) radial ventilator” , ITU Institute of Science and Technology, 2007.
-
Cekli, Ergun “Enhancement and smoothing methods for experimental data: Application to PIV measurements of a laminar separation bubble”, ITU Institute of Science and Technology, 2007.
-
Şahin, Yavuz “Çamaşır makinası su saçınıklığının deneysel incelenmesi”, İTÜ Fen Bilimleri Enstitüsü, 2006.
-
Arslan, Tufan "Numerical solution of fluid flow in complex domains using vorticity-transport approach", ITU Institute of Science and Technology, 2003.
-
Gocmen, Kenan “Development of low order models for momentum and energy equations", ITU Institute of Science and Technology, 2003.
Conducted by Dr. Sertac CADIRCI
MSc Theses
-
Karabay, Ahmet Yasin “Numerical and experimental investigation of the effects of exhaust port and valve leaf on thermodynamic efficiency and sound power in a variable capacity compressor", ITU Institute of Science and Technology, 2019.
-
Sonkaya, Fatih “Experimental and numerical investigation of active flow control by coordinately jet actuator with dual slot on NACA0015 airfoil", ITU Institute of Science and Technology, 2019.
-
Ahmadi, Vahid Ebrarimpour “Numerical investigation of CRAH bypass in the air-cooled data centers", ITU Institute of Science and Technology, 2019.
-
Karahan, Kerem “Optimization of suction and exhaust reed valve in COP and SPL for reciprocating inverter compressor", ITU Institute of Science and Technology, 2019.
-
Şan, Deniz “Numerical solutions of euler equations with finite volume methods", ITU Institute of Science and Technology, 2019.
-
Turutoğlu, Cem “Numerical investigation of airflow in the human nasal cavity and virtual septoplasty", ITU Institute of Science and Technology, 2018.
-
Gürel, Semih “Numerical and experimental investigation of increasing cooling capacity for compact variable capacity compressor", ITU Institute of Science and Technology, 2018.
-
Atici, Ömer Alp “Experimental and theoretical investigation of straight fin and tube heat exchangers thermal performances in a closed cabin", ITU Institute of Science and Technology, 2018.
-
Coşgun, Furkan “Aeroacoustics investigation of low mach number cavity flow", ITU Institute of Science and Technology, 2018.
-
Toptan, Berat “Simulation of the clutch pedal return time for light commercial vehicles", ITU Institute of Science and Technology, 2017.
-
Ayaz, Emrah “Numerical investigation of in cylinder flow structure for TLM16V185 heavy duty diesel", ITU Institute of Science and Technology, 2017.
-
Solmaz, Serkan “Household appliance integrated heat pump atmospheric water generator design", ITU Institute of Science and Technology, 2017.