Publications

International Journal Papers

  1. Yıldızeli A., Çadırcı S., “Multi objective optimization of a micro-channel heat sink through genetic algorithm”, International Journal of Heat and Mass Transfer, volume 146, 2020

  2. Özsipahi M., Kose H. A., Çadırcı S., Kerpicci H., Güneş H., “Experimental and numerical investigation of lubrication system for reciprocating compressor”, INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, pp.224-233, 2019

  3. Özsipahi M., Subaşı A., Güneş H., Şahin B., “Numerical investigation of hydraulic and thermal performance of a honeycomb heat sink”, International Journal Of Thermal Sciences, pp.500-509, 2018

  4. Subaşı A., Özsipahi M., Sahin B., Güneş H., “Performance evaluation of RANS-based turbulence models in simulating a honeycomb heat sink” Heat And Mass Transfer, pp.2435-2443, 2017

  5. Özsipahi M., Çadırcı S., Güneş H., Sarıoğlu K., “A Comparıson of an Analytıcal and Numerıcal Flow Model for the Lubrıcatıon System of a Varıable Speed Hermetıc Compressor”, Journal of Thermal Science and Technology, 2016

  6. Çadırcı S., Ak S. E., Selenbas B., Güneş H., “Geometrıc Modıfıcatıons to Mınımıze Lıft Actıng on A Simplified Front Wındshıeld Wıper Blade”, Journal of Thermal Science and Technology, pp.103-109, 2016

  7. Subaşı A., Güneş H., “Effects of Wall Heatıng on Boundary Layer Transıtıon Over a Flat Plate”, Journal Of Thermal Scıence And Technology, pp.59-68, 2015

  8. Ozsipahi M., Cadirci S., Gunes H., Sarioglu K., Kerpicci H., “A numerical study on the lubrication system for hermetic reciprocating compressor used in household refrigerators”, International Journal of Refrigeration 48, pp.210-220 (2014).

  9. Yilmaz, O., Gunes, H., Kirkkopru, K. “Optimization of a Profile Extrusion Die for Flow Balance” Fibers and Polymers, 15(4):753-761 (2014).

  10. Subaşı, A., Güneş, H., “Effects of wall heating on boundary layer transition over a flat plate”, Isı Bilimi ve Tekniği Dergisi-Journal of Thermal Science and Technology, Vol. 1, No. 35, (2015).

  11. Cadirci S., Gunes H., 2014, “Heat transfer enhancement behind a backward facing step with active flow control”, Journal of Thermal Science and Technology 34, No: 2, pp. 129-141 (2014).

  12. Cadirci S., Gunes H., 2014, “Inverse design of a mixed convection problem via proper orthogonal decomposition”, Journal of Thermal Science and Technology 34, No: 2, pp. 61-73 (2014).

  13. Cadirci S., Gunes H., Rist U., “Numerical investigation of a jet and vortex actuator in a cross flow boundary layer”, European Journal of Mechanics-B 44, pp.42-59 (2014).

  14. Cadirci S., Gunes H., Rist U., “Active flow control applications with a jet and vortex actuator in a laminar cross flow”, International Journal of Heat and Fluid Flow 39, pp. 146-159 (2013).

  15. Gunes, H. Rist, U. On the use of kriging for enhanced data reconstruction in a separated transitional flate-plate boundary layer, Phys. Fluids 20, 104109 (2008).

  16. Gunes, H. Rist, U.Spatial resolution enhancement/smoothing of stereo–particle-image-velocimetry data using proper-orthogonal-decomposition–based and Kriging interpolation methods Phys. Fluids 19, 064101 (2007).

  17. Gunes, H. Sirisup, S. and Karniadakis, G.E., Gappy data: To krig or not to krig, Journal of Computational Physics, Vol. 212, Issue 1, pp. 358-382 (2006).

  18. Gunes, H., Rist, U. “POD-Reconstruction of a Transitional Boundary Layer with and without Control”, Physics of Fluids, Vol. 16, pp. 2763-2784 (2004).

  19. Gunes, H. “Analytical solution of buoyancy-driven flow and heat transfer in a vertical channel with spatially periodic boundary condition”, Heat and Mass Transfer, Springer-Verlag, (2003).

  20. Gunes, H., Liakopoulos “Three-dimensional convective cooling in a vertical channel with flush-mounted heat sources”, International Journal of Heat and Mass Transfer, 46 (5), 791-808 (2003).

  21. Gunes, H. Three-Dimensional Buoyancy-Driven Flow in a Vertical Channel with Heated Ribs, International Journal of Transport Phenomena, 4, 119-132 (2002).

  22. Gunes, H. “Low-dimensional modeling of non-isothermal twin-jet flow,” Int. Commun. Heat Mass Transfer, 29 (1), 77-86 (2002).

  23. Gunes, H. “Low-order dynamical models of thermal convection in high-aspect ratio enclosures,” Fluid Dynamics Research, 30 (1), 1-30 (2002).

  24. Sahan, R.A., Gunes, H. and Liakopoulos, A. “A modeling approach to transitional channel flow”, Computers and Fluids, 27, (1), 121-136 (1998).

  25. Gunes, H., Liakopoulos, A. and Sahan, R.A. “Low-dimensional description of oscillatory convection: The small Prandtl number limit”, Theoretical and Computational Fluid Dynamics, 9, (1), 1-16 (1997).

  26. Gunes, H., Sahan, R.A. and Liakopoulos, A. “Spatio-temporal structures of buoyancy-induced flow in a vertical channel”, Numerical Heat Transfer Part A, 32, (1), 51-62, (1997).

  27. Liakopoulos, A., Blythe, P.A. and Gunes, H. “A reduced dynamical model of convective flows in tall laterally heated cavities”, Proceedings of the Royal Society of London A, 453, 663-672 (1997).

  28. Sahan, R.A., Liakopoulos, A. and Gunes, H. “Reduced dynamical models of non-isothermal grooved channel flow”, Physics of Fluids, 9, (3), 551-565 (1997).

International Conference Papers

  1. Coşkun, U C.,Güneş H., Sarıoğlu K. “A Numerical Model of Fluid Structure Interaction of a Fluttering Valve” Int. Conf. On Jets,Wakes And Separated Flows, KTH Mechanics, Stockholm, Sweden, June 16-18, 2015

  2. Coşkun, U C., Çadırcı, S., Güneş H. “Active Flow Control behind a Backward Facing Step Using a Zero Net Mass Flux System” Int. Conf. On Jets,Wakes And Separated Flows, KTH Mechanics, Stockholm, Sweden, June 16-18, 2015

  3. Subaşı, A., Puckert, D., Güneş, H., Rist, U., “Calibration of constant temperature anemometry with hot-film probes for low speed laminar water channel flows”, 2015, 13th International Symposium on Fluid Control, Measurement and Visualization, Doha/Qatar.

  4. Coskun U C., Gunes H., Sarioglu K., “Numerical Investigation of Suction Muffler in Household Refrigerator Compressor” ESDA2014-20411, Proceedings of the ASME 2014 12th Biennial Conference on Engineering System Design and Analysis ESDA2014, June 25-27, 2014, Copenhagen, Denmark.

  5. Puckert, D., Subaşı, A., Rist, U., Güneş, H., “Experimental investigations of critical roughness heights in a laminar boundary layer”, 2015, 13th International Symposium on Fluid Control, Measurement and Visualization, Doha/Qatar.

  6. Subaşı, A., Güneş, H., “Numerical investigation of dual heater strips on boundary layer transition over a flat plate”, 7th International Ege Energy Symposium & Exhibition, June 2014, Uşak/Turkey.

  7. Subaşı, A., Güneş, H., “Control of boundary layer transition over a flat plate using discrete heater strips”, International Symposium on Convective Heat and Mass Transfer, June 2014, Kuşadası/Turkey.

  8. Coşkun U C., Guneş H., Sarioğlu K., Kerpiçci H., “Unsteady Flow Simulation in Suction Muffler of a Hermetic Reciprocating Compressor” Esda 2014-20411, Proceedings of the ASME 2014 12th Biennial Conference on Engineering System Design and Analysis ESDA2014, June 25-27, 2014, Copenhagen, Denmark.

  9. Cadirci S., Gunes H., “A Parametric Investigation of Jet and Vortex Actuator” ESDA2014-20411, Proceedings of the ASME 2014 12th Biennial Conference on Engineering System Design and Analysis ESDA2014, June 25-27, 2014, Copenhagen, Denmark.

  10. Tas S., Cadirci S., Gunes H., Sarioglu K., Kerpicci H., “Experimental Investigation of Oil Flowrate in a Hermetic Reciprocating Compressor” ESDA2014-20044, Proceedings of the ASME 2014 12th Biennial Conference on Engineering System Design and Analysis ESDA2014, June 25-27, 2014, Copenhagen, Denmark.

  11. Ozsipahi M., Cadirci S., Gunes H., Sarioglu K., Kerpicci H., “Numerical Simulation of Lubrication System in a Hermetic Reciprocating Compressor” ESDA2014-20043, Proceedings of the ASME 2014 12th Biennial Conference on Engineering System Design and Analysis ESDA2014, June 25-27, 2014, Copenhagen, Denmark.

  12. Coskun U.C., Cadirci S., Gunes H., “Heat Transfer Enhancement behind a Backward Facing Step Using Localized Suction and Blowing” Proceedings of CONV-14, Int. Symp. on Convective Heat and Mass Transfer June 8 – 13, 2014, Kuşadası, Turkey.

  13. Ozsipahi M., Cadirci S., Gunes H., Sarioglu K., Kerpicci H., Numerical Investigation of Oil Flow in a Hermetic Compressor, Proceedings of the 2013 International Conference on Mechanics, Fluids, Heat, Elasticity and Electromagnetic Fields.

  14. Coskun U C., Gunes H., Sarioglu K., “Numerical Investigation of Suction Muffler in Household Refrigerator Compressor” Proceedings of the 2013 International Conference on Mechanics, Fluids, Heat, Elasticity and Electromagnetic Fields.

  15. Cadirci S., Gunes H., Rist U., “Numerical Investigation of JaVA-Induced Flow in Quiescent Water”, ASME 2013-International Mechanical Engineering Congress and Exposition (IMECE), November 15-21, 2013, San Diego, USA.

  16. Cadirci S., Gunes H., “Boundary Layer Separation Control on an Inclined Plate Using Jet and Vortex Actuator”, ASME 2013-International Mechanical Engineering Congress and Exposition (IMECE), November 15-21, 2013, San Diego, USA.

  17. Cadirci S., Gunes H., “Active Flow Control with an Oscillating Backward Facing Step in a Shallow Open Channel”, ASME 2012-International Mechanical Engineering Congress and Exposition (IMECE), November 09-15, 2012, Houston, USA.

  18. Cadirci S., Gunes H., Rist U., Peters B., “Experimental Investigation of Jet and Vortex Actuator Using Particle Image Velocimetry”, ASME 2012-International Mechanical Engineering Congress and Exposition (IMECE), November 09-15, 2012, Houston, USA.

  19. Cadirci S., Gunes H., “Active Flow Control with an Oscillating Backward Facing Step” ESDA2012-82645, Proceedings of the ASME 2012 11th Biennial Conference on Engineering System Design and Analysis ESDA2012, July 02-04, 2012, Nantes, France.

  20. Cadirci, S., Selenbas, B. and Gunes, H., “Optimization of a centrifugal fan impeller using Kriging-simulated annealing”, ASME 2011-International Mechanical Engineering Congress and Exposition (IMECE), November 11-17, 2011, Denver, USA.

  21. Cadirci, S., Akguc, A. and Gunes, H., “A Kriging-simulated annealing meta-algorithm for optimization of convective heat transfer in a grooved channel”, ASME 2011-International Mechanical Engineering Congress and Exposition (IMECE), November 11-17, 2011, Denver,USA.

  22. Cadirci, S. and Gunes, H., “Proper orthogonal decomposition analysis of JaVA flows for cross flow conditions”, ASME 2011-International Mechanical Engineering Congress and Exposition (IMECE), November 11-17, 2011, Denver, USA.

  23. Cadirci, S. and Gunes, H., “Flow separation control behind a backward facing step” 7. International Conference on Computational Heat and Mass Transfer (ICCHMT), July 18-22, 2011, Istanbul, Turkey.

  24. Cadirci, S., Gunes, H., Rist, U. And Peters, B., “Flow visualizations of jet and vortex actuator under cross flow conditions” 7. International Conference on Computational Heat and Mass Transfer (ICCHMT), July 18-22, 2011, Istanbul, Turkey.

  25. Selenbas, B., Gunes H., Gocmen, K., Bahceci U., Bayram, B. Aerodynamic desing and optimization of a heavy truck for drag reduction ESDA2010-24482, Proceedings of the ASME 2010 10th Biennial Conference on Engineering System Design and Analysis ESDA2010, July 12-14 2010, Istanbul, Turkey.

  26. Cadirci S., Gunes H. On the Use of POD Models for Convective Flow in a Grooved Channel ESDA2010-24892 , Proceedings of the ASME 2010 10th Biennial Conference on Engineering System Design and Analysis ESDA2010, July 12-14 2010, Istanbul, Turkey.

  27. Cadirci S., Gunes H., Rist U.,Numerical Investigation of Jet and Vortex Actuator (JaVA) for Active Flow Control AIAA- 5th Flow Control Conference , 28 June-01 July 2010 Chicago, USA.

  28. Gunes, H., Cadirci, S. Modeling and Inverse Design of Convective Heat Transfer in a Grooved Channel Using Proper Orthogonal Decomposition, ASME International Mechanical Engineering Congress & Exposition IMECE-2009, 07-10 November 2009, Lake Buena, Florida USA

  29. Yilmaz, O., Gunes, H., Kirkkopru, K. Design Optimization of an L-Shaped Profile, ASME International Mechanical Engineering Congress & Exposition IMECE-2009, 07-10 November 2009, Lake Buena, Florida USA.

  30. Gunes, H., Cadirci, S., Gocmen, K. Numerical Simulation of Mixed Convection in a Rectangular Cavity with Multiple Heat Sources, ASME International Mechanical Engineering Congress & Exposition IMECE-2009, 07-10 November 2009, Lake Buena, Florida USA.

  31. Gunes, H. Cekli, H. E., Rist, U. Data enhancement, smoothing, reconstruction and optimization by kriging interpolation, Proceedings of the 2008 Winter Simulation Conference, 07-10 December 2008- Miami, Florida USA.

  32. Rist, U., Gunes, H., Cadirci, S. Qualitative and quantitative characterization of a Jet and Vortex Actuator, (Workshop)- 16-18 October 2008-FLUBIO Workshop, Italy.

  33. Cadirci, S. Gunes, H. Rist, U. “Temporal analysis of jet and vortex actuator (JaVA)-induced flows”, Int. Conf. on Jets, Wakes and Separated Flows, Sept. 16-19, 2008, Technical University of Berlin, Berlin, Germany.

  34. Gunes, H., Cadirci, S., Rist, U. “An experimental investigation of jet and vortex actuator for active flow control” AIAA 4th Flow Control Conference 23-26 June 2008, Seattle, WA.

  35. Rist, U. and Gunes, H., Cadirci, S. “Experimental verification of the jet and vortex actuator (JaVA)”, 13th STAB Workshop, DLR-Göttingen, 14-16 November 2007 (abstract).

  36. Cekli, H.E., Gunes, H. “Spatial resolution enhancement and reconstruction of mixed convection data using Kriging method”, Proceedings of IMECE2006 ASME International Mechanical Engineering Congress and Exposition November 5-10, 2006, Chicago, Illinois, USA.

  37. Rist, U. and Gunes, H. “Untersuchungen zur Rekonstruktion von Messdaten auf der Basis von Kriging und POD”, 12th STAB Workshop, DLR-Göttingen, 8-9 November 2005 (abstract).

  38. Piskin, S. and Gunes, H. “Kriging reconstruction of gappy data for twin-jet flow. International Conference on Computational Science and Engineering, Istanbul, June 27-30, 2005.

  39. Rist, U. and Gunes, H. “Untersuchungen zur POD-basierten Strömungsfeldvorhersage in einer transitionellen Plattengrenzschicht”, 11th STAB Workshop, DLR-Göttingen, 6 November 2003 (abstract).

  40. Gocmen, K. Gunes, H. “Mixed convection in a partially open rectangular cavity”, Proc. ESDA2002, 6th Biennial Conference on Engineering Systems Design and Analysis, Istanbul, Turkey, July 8-11, 2002.

  41. Gunes, H. Gocmen, K. ” Reduced models for oscillatory mixed convection”, Proc. ESDA2002, 6th Biennial Conference on Engineering Systems Design and Analysis, Istanbul, Turkey, July 8-11, 2002.

  42. Kavurmacioglu, L. and Gunes, H. “A reduced order model of a weakly-confined twin jet flow and its stability analysis”, Proc. ASME Fluids Eng. Div. Summer Meeting, New Orleans, Louisiana, May 29-June 1, 2001.

  43. Gunes, H. and Kavurmacioglu, L. “Identification of coherent structures in driven-cavity flows using proper orthogonal decomposition”, Recent Advances in Transport Phenomena, Eds. I.Dincer, M.F. Yardim, The 12th Int. Symp. On Transport Phenomena, Elsevier, 203-208, 2000. (also selected for publication in Int. J. Transport Phenomena).

  44. Gunes, H. and Liakopoulos, A. “Three-dimensional buoyancy-driven flow in a vertical channel with heated ribs”, Recent Advances in Transport Phenomena, Eds. I.Dincer, M.F. Yardim, The 12th Int. Symp. On Transport Phenomena, Elsevier, 149-154, 2000. (also selected for publication in Int. J. Transport Phenomena in extended form).

  45. Gunes, H., Sahan, R.A. and Liakopoulos, A. “Low-dimensional representation of transitional buoyancy-driven flow in a vertical channel with discrete heaters”, HTD Vol.303, National Heat Transfer Conference-Volume 1, ASME, pp. 125-137, 1995.

  46. Gunes, H. and Sahan, R.A. “Transitional flow analysis in a grooved channel”, FED Vol.126, Unsteady Flows, ASME, pp.29-36, 1995.

  47. Sahan, R.A. Gunes, H. and Liakopoulos, A. “Low-dimensional models for coupled momentum and energy transport problems”, HTD-Vol.319/EEP-Vol.15, Cooling and Thermal Design of Electronic Systems, ASME, 1-15, 1995.

  48. H. Gunes, and A. Liakopoulos, “Three-dimensional convective cooling in a vertical channel with protruding heat sources”, Advances in Electronic Packaging, ASME/EEP, Vol.4-2, 755-768, 1993.

National Conference Papers

  1. Umut Can Coşkun, Sertaç Çadırcı, Hasan Güneş, ‘Yersel Emme ve Üfleme ile Ters Basamak Ardındaki Akış Kontrolü ve Isı Transferinin İyileştirilmesi’, III. Ulusal Havacılıkta İleri Teknolojiler Konferansı, HİTEK 2014, 18-19 Haziran 2014.

  2. Subaşı, A., Güneş, H., “Düz bir levha üzerinde cidardan yapılan ısıtmanın/soğutmanın sınır tabaka geçişine etkisinin sayısal incelenmesi”, III. Ulusal Havacılıkta İleri Teknolojiler Konferansı, Haziran 2014, İstanbul.

  3. Mustafa Özsipahi, Sertaç Çadırcı, Hasan Güneş, Kemal Sarıoğlu, Hüsnü Kerpiççi, ‘Hermetik Bir Kompresördeki Yağ Debisinin Sayısal İncelenemesi’, 19. Ulusal Isı Bilimi ve Tekniği Kongresi, 09-12 Eylül 2013, Samsun.

  4. Sibel Taş, Sertaç Çadırcı, Hasan Güneş, Kemal Sarıoğlu, Hüsnü Kerpiççi, ‘Hermetik Bir Kompresördeki Yağ Debisinin Deneysel İncelenemesi’, 19. Ulusal Isı Bilimi ve Tekniği Kongresi, 09-12 Eylül 2013, Samsun.

  5. H. Güneş, S. Çadırcı, A. Akgüç, “Taşınımla Isı Transferinin Kriging -Benzetilmiş Tavlama ile Modellenmesi ve Optimizasyonu” – Bilimde Modern Yöntemler Sempozyumu, 15-17 Ekim 2008, Osmangazi Üniversitesi- Eskişehir.

  6. Güneş H., Çadırcı S., Rist U., “Akış Kontrolü İçin Jet ve Vorteks Aktüatör (JaVA) Akış Tiplerinin Deneysel İncelenmesi”- II. Ulusal Havacılık ve Uzay Konferansı, 15-17 Ekim 2008, İTÜ- İstanbul.

  7. H. Güneş, S. Çadırcı, U. Rist (2007): Spatial resolution enhancement and smoothing of experimental data: DNS-based versus Kriging interpolation, IAG report IB 07-03 / 29 Aralık 2007, (Üniversite Bülteni)- Stuttgart, Almanya.